
40W 10600nm Cool beam Fractional CO2 laser vaginal tightening equipment for acne scar stretch mark removal ,
Fractional Co2 Laser Machine Application
1. Smooth scars such as surgical scars, burnt scars, acne scars, etc,
2. Skin renewing and resurfacing, sun damage recovery,
3. Wrinkle removal and skin tightening,
4. Pigmentation removal such as intractable chloasmas, age spots, blemishes, speckle etc,
5. Skin excrescence such as wart,etc,
6. Acne treatment,
7. Vaginal treatment: vaginal tightening, vaginal whitening, vrine incontinence.
This technology is known as Fractional Photothermolysis theory (dot-matrix light and heat decomposition), the 10.6μm far-infrared laser will evenly mark with tiny holes, and then cause a series biochemical reactions inside the skin, thus to reach the results of skin lifting & resurfacing, pigments and scar removal, etc, finally let the skin return to young again.
How does Vaginal treatment wrok?
It concerntrated trearmal heating of the vaginal tissue inner layers induces collagen and elastine contraction and regeneration of these proteins in the longer term. These molecular signal activate the entire wound healling process of the body's local immune system. The treatment outcome is the complete remodeling of the vaginal tissue in addition to re-establishment of firm "young like" vaginal tissue embedded with string-like, thick and long collagen fibers.
Fractional Co2 Laser Machine Specification
Basic information | Wavelength | 10.600 nm |
Pulsed radiofrequency | 0.530 W | |
Ultrapulse | 1.Max power: 130W 2.Pulse width:200 to 500μs. you can choose | |
Pulse | Average power: 40W | |
Matrix mode | Scan pattern | Square, rectangle, round, triangle, oval, 6-diamond shape, line or customized graphics |
Scan pattern size | 0.1x0.1mm—20x20mm | |
Dot quantity | 400 dots at most | |
Working state | ultrapulsed mode; | |
Scan mode | free scan; Sequence scan; maximum distance scan | |
Pulse duration | 0.1-10ms | |
Spot distance | 0.1-2mm | |
Pulse energy | 1mj to 100mj is optional for each dot. | |
Technical specification | Laser apparatus | Sealed off laser device stimulated by direct current |
Condenser focus | f=50mm | |
Beam divergence angle | 0.3 mrad | |
Spot size | ≥0.2mm at the focus | |
Radiation time / Interval time | 0.01 1 s | |
Aiming beam | 635nm infrared ray | |
Beam transport device | 7 articular arm | |
Net weight | 57 kg | |
Machine size | 45x50x118cm | |
Power supply | 220V/110V |
Fractional Co2 Laser Machine Advantage
1) 3 in 1 system, easy and convenient for operation.
a. Fractional CO2 Laser for skin rejuvenation and scar removal
b.and Normal CO2 laser for surgery operation
c. Vagnal tightening for optional.
2.)Imported excellent 7 articular optical-arm, easy operated and greatly reduces the energy loss
3) Imported USA Coherent RF tube emitter,
a. even output energy, deeper penetration(8-10mm under the skin)
b. long lifetime:3-5 years
c. smaller sopt size:0.05mm at dia
Glass tube ,RF tube can choose
4) 6 scan modes: Sequence, Random, Maximum distance A&B, Equidistance and fast
shot,
5) 7 scan shapes:square, rectangle, round, triangle, oval,
6-diamond shape and line.
6) 3 vaginal treatment probes for vaginal tightening, vaginal rejuvenation, vaginal whitening,
7) Ultra-quiet pump used, lower noise but larger water flow,
8) 10.4 inch real LCD color touch screen, most humanized software
control.
Treatment procedure and FAQ
1. Before operation, apply anesthetic for 20-30 minutes,
2. Iodophor disinfection,
3. Saline cleanup,
4. Start treatment,
5. After operation , use medical repair mask .
Q1.What are the benefits of Fractional treatment?
Smoother, fresher looking skin
Improved tone and texture
Reduce wrinkles around the eyes
Improved appearance of acne scars and surgical scars
Q2.How many treatments will I need and how will they be spaced?
Everyone’s skin is different I, but clinical studies suggest that
for most people , maximum results are realized in just 3 to 5
sessions. They are usually spaced 4 to 6 weeks apart.
Q3. Does Fractional treatment hurt?
Topical anesthesia is applied before the procedure and cold air is
used on the treatment area during the procedure to minimize
discomfort.After the treatment, most patients report a feeling
similar to having gotten too much sun. It usually disappears after
1 to 3 hours.
Q4. What side-effects can I expect after treatment and how long
will they last?
You will have some degree of redness and swelling. The intensity
and duration depends on how aggressive the treatment was and your
particular healing characteristics. Other temporary side-effects
may include minor itching, dry skin, peeling or flaking, and a
bronzed skin appearance. You will be given specific instructions
about what to expect for your particular treatment and how to
minimize the side-effects.
Q5.What precautions should I take after treatment?
Wear sunscreen of SPF 30 or higher and avoid direct sun exposure
while you’re healing for at least 3 months after your last
treatment .Further protect yourself by wearing wide-brimmed hats if
you expect to be out in sun.
Q6.How long do the effects of Fractional treatment last?
It depends on your particular condition and how you care for your
skin. Once your skin is restored, continue to protect it as
described above. For conditions, such as melasma, it is very
important to avoid direct sun exposure. Your physician will give
you specific advice based on your individual needs. Find out how
Fractional treatment can help you look as good as you feel.
Fractional treatment can work wonders, but the first step is up to
you. Lives too short…look as good as you feel-ask your physician
today for more details about the benefits Fractional treatment can
deliver for you.
Related Product
Key Words
Fractional co2 laser, rf co2 tube fractional 40w, laser skin rejuvenation and scar removal, vaginal tighten laser, vaginal tightening machine.
Beijing Zohonice Beauty Equipment Co.,Ltd.
ZOHONICE was founded in 2008 until now; we specialized in optical kind of beauty apparatus sales and technical support service. Main customer groups are overseas beauty apparatus distributors and beauty salon end customers. Since establishment, our company has been insisting on E-commerce (that is B2B platform) marketing way to acquire customer’s resources, and actively participate in the scale of the industry trade fair for the company's growth experience.
We are very professional and have full experience in various kinds of beauty equipment. We are capable of supplying our machines in various kinds of packaging according to customer’s requirements. Now we are producing more than 80 kinds of machine which are exported to 40 countries and regions all over the world. But ZOHONICE has never stop going forward , in order to control the cost and supply competitive prices for customers, in 2010 , we built another factory with our partners.
ZOHONICE have an special professional registration department , who in charge of domestic registration and overseas registration .We can help our current or potential customers to do the registration work. We have a good relation with our distribution from all over the world. Quality and service are always the top concern in ZOHONICE. We provide full set of service , including shipping , training and repairing .
ZOHONICE’s mission is Service first , Quality best . We are always try our best to offer the best service and the most competitive price with high quality goods for our customer , it’s the way we win our customers and market.
Given chance and full space , we should show you all of our advantages and let’s go up together. I’m sure we can establish long-term and friendly business relationship with your esteemed company because your trust and our excellent service.