Three Heads ND YAG Laser Machine , Laser Hair And Tattoo Removal Machine

Tattoo and spot removal ND YAG Laser Machine / yag laser tattoo removal machine

Application:

1. Removal tattoo, eyeliner, eye brow, remove black, red, blue, all kinds of color pigment
2. Remove dermis spot, fleck, black nevus, age pigment, birthmark and Nevus of Ota
3. The 1064nm wavelength mainly for black, blue, cyan pigment
4. The 532nm wavelength mainly for red, coffee, brown pigment

Advantage:

1. Truly portable, continent
2. New-developed hand piece
3. Infrared ray aiming
4. Water-flow monitor
5. Water flow and temp monitor
6. Plug and play functione and meet the continuously long time work of machine.

Specification

Application:

Treatment course for different illness case as follows:
Treatments Treatment course required ( cure times) Treatment course interval Remark (requirements in surgery)
eyebrow-embroidery(eyeliner grain), 1 –2 times, 30-60 days, Eyebrow blow, eyeball protection
Eyebrow-embroidery ( eyeliner embroidery), 1-3 times, 45-60 days, Eyebrow blow, eyeball protection
Lip line (red dyed lip), 1-3 times, 15-45 days, Use 532nm filter
Tattoo(caused by extraneous wounds), 1-4 times, 30-60 days, Blood infiltration will be fine on wounds
Freckle, age spot, 1-4 times, 15-30 days, Blood infiltration will be fine on wounds
Birthmark, nevus/mole, 3-7 times, 45-90 days Must have Blood infiltration.

(1) Treatment for tattoo in eyebrow

Customer could not open eyes during treatment, operator should adjust energy according to depth of tattoo color, hold the handle and move it to treatment area slowly to make customer feel acceptable in mentally. Right now, the speed of flash could be set 3HZ, keep head of the handle a two-finger distance to treatment area, start treatment from head of eyebrow to end of eyebrow. It is needed to treat again in 5-10 minutes if the color of tattoo re-appear.

(2) Remove eye line

The speed of flashes could be set 4-5HZ,adjust the energy of light to minimum energy, keep a one-finger distance between head of handle and treatment area. Operator should strictly protect customers’ eyes with panel for eyelid or medical pledget (panel for eyelid)of 1cm depth.
Treatment should be started from down eye line, customer should deeply close eyes and keep eyeball up-sight inside. Operator should press the pledget (panel for eyelid) with forefinger and push up eyelid, peel down eyelid with middle finger to bare the eye line, treat it with flashes of 4-5Hz. Then, treat up eye line. Also customer should close eyes and keep eyeball down-sight inside. Operator should press the pledget (panel for eyelid) with middle finger and push eyelid down, push eyelid up with forefinger to bare the eye line, treat it with flashes of 4-5Hz.

(3) Remove lip line

The speed of flashes could be set 5Hz,keep a 3/4 finger distance between head of handle and treatment area. It is better to remove black, coffee, deep, red and brown lip line with 1064nm head at first time and then, treat again with 532 nm head.
Notice: All tattoos in lip should be treated in 6 months after making. OR removal treatment will fail. It should have 45-60 days interval to continue next treatment until remove all.

(4) Remove tattoo

The speed of flashes could be set 3Hz/5Hz.It is better to use high energy for treatment until treatment area seeps a little blood. It should have 45-90 days interval to continue next treatment until remove all.

(5) Remove spot and nevus

The speed of flashes could be set 3Hz/5Hz.Keep 3-4 fingers distance between head of handle and treatment area. It is better to use high energy for treatment until treatment area seeps a little blood. It is advised to use 1064 nm head for normal spot and nevus treatment, but for deep color spot and nevus, it is better to use 532nm head for treatment. It should have a 15-30days interval to continue next treatment until remove all.

(6) Remove birthmark

The speed of flashes could be set 3Hz/5Hz.It is better to use high energy for treatment until treatment area seeps a little blood. It is advised to use 1064nm head for birthmark treatment, but for red and deep color birthmark, it is better to use 532nm head for treatment. It should have 45-90 days interval to continue

What is the treatment Principle?

1. Adopting the Q-Switched ND:YAG model,the equipment uses laser to emit high energy instantaneously which smashing the pigment of pathological tissues,namely the laser leading explosive effect:High energy emits instantaneously,making particular wavelength laser penetrating epidermis and getting into pathological pigment tissues in only 6nms.Then pigments expand in top speed and explode.The superficial epidermis would be bounded out of body;other part of the pigments would split into granules which would be engulfed by macrophages,then exclude by the lymphatic system finally.The pigment becomes shallow gradually finally disappear while the surrounding normal skin tissues keep sound as they do not absorb particular wavelength laser.

Beijing Xinyingyue Beauty Equipment Science And Technology Co., Ltd. is a professional high-tech company integrating the research, production, sale and after-sales service of optical medical equipment and beauty equipment. We have been conducting international cooperation and technical exchange with research centers of laser and light energy in European countries, the United States and Asian countries.

Our products are SHR OPT IPL machines, CO2 fractional laser machines, HIFU machines, 808nm diode laser machines, Q switched nd yag laser machines, vacuum cavitation and cryolipolysis slimming machines, skin analyzer machines,etc. Depending on high technology, keen market concept and distinct management methods, we first launched series of high-tech spectral systems to bring the breakthrough of applying optical energy to the field of cosmetics and move towards internationalization. 

We are making innovation with advanced design concept, introducing computerized management and striving to be modernized. We always adhere to the tenet of "Continuously Creating Value for Customers, Constantly Updating Technology, Succeeding with a Famous Brand, Creating an International Brand" and lead the development of our enterprise with international strategies. 
 

We offer OEM&ODM service for our distributors. We sincerely welcome credit company to be our distributors and establish long term relationship with us!
 

Beijing Xinyingyue science and technology company welcome your inquiry!